free shipping over $100

Menu 0

Residential and Office Flooring Solutions

 

Flexi-Felt Clear Floor Protectors

$3.30

    1. Sold Individually
    2. Free Install Tool with all orders of 6825, 6835 and 6845 models. Install tool is not appropriate for installing the smaller 6815 and 6820 models.
    3. Flexi-Felt Clear Floor Protectors offer quality protection without nails, screws, or adhesive. These chair floor protectors are different than your typical floor protector, as they are a stretchable, clear material with a felt pad attached at the bottom. The clear portion stretches over a chair leg, giving you maximum protection for your floors without an adhesive mess, or without the fear of the chair floor protectors falling off over time. We are so confident about our product we offer a UNBEATABLE FELT WARRANTY guaranteeing that the felt will never separate from the plastic sleeve.
    4. The protectors vary in size, meaning they will fit any style of chair leg ranging from 15mm-51mm. The felt pad at the bottom of the protector is made of a soft wool blend that has proven to be extremely durable. The density of the wool is so high, it is practically impossible to wear down the felt on the pad, as many felt pads tend to do over time. They are guaranteed to leave no scratches behind.
    5. The Flexifelt clear range will fit most square and round leg shapes, however they are not really designed for rectangular or highly angled chair legs. If slightly out of square no more than 5mm they should fit fine. Just half the measurement of the two sides to get your sizing. Also if your chairs are slightly angled then no problem also, it's only if they start to get way off 90 degrees that they become hard to fit. If in doubt send us a message or picture.
    1. To find the right size simply measure the diameter of your round leg or the width of your square furniture leg. If you have a leg that tapers up then measure the widest part 20mm up from the floor. An easy way to work out an accurate diameter of a round tapered chair leg is as follows: grab a piece of paper and wrap it around the chair leg 20mm up from the floor. Where it comes back around to meet up place a mark on the paper and then measure this distance with a ruler. Once you have the circumference measurement simply divide by 3.14 to get the diameter of the leg. For example if the leg circumference was 65mm, it would be 65mm divided by 3.14= 20.7mm. This would then mean for a round leg you would simply choose the appropriate model number according to the size chart, in this case model 6820. Just click on the size guide below to work out which model will suit your furniture best.
    2. No Scratches, No Noise, No Problem, Guaranteed
    1. Please watch the videos to the left of screen to see best installation methods
    2. Free Install Tool with all orders of 6825, 6835 and 6845 models. Install tool is not appropriate for installing the smaller 6815 and 6820 models.
View full product details
Size Guide

Sizing Guide Flexi-Felt Clear

Below is a sizing guide for each of our models to fit either a round or square furniture leg. You may find each model can stretch just a little further than these numbers but it requires a bit of effort.

 

 

MODEL SQUARE LEG ROUND LEG 
6815 NA 15-18mm
6820 NA 19-22mm
6825 21-24mm 25-29mm
6835 28-32mm 35-39mm
6845 36-41mm 44-49mm

 

 

 

Industrial Strength Adhesive Felt Discs 19mm

$3.85

    1. Sold in Packs of 10
    2. Flexi-Felt’s 19mm Industrial Strength Adhesive Felt Discs are the perfect felt pads for thin-legged furniture or table top appliances. Pre-cut to 19mm discs, the felt pads can be used to protect your floors, furniture, and countertops. Not only will they reduce scratches, but they are also proven to reduce noise.
    1. Sold in Packs of 10
    2. Pre-cut to 19mm round discs
    3. While most felt protectors wear down or fall off over time, Flexi-Felt’s 19mm Industrial Strength Discs integrate a powerful adhesive into wool. This means that Flexi-Felt’s pads are 25 times more sheer resistant that competitor’s pads. When weight is placed on other felt pads, they wear down or slip off. But, when weight is placed on Flexi-Felt pads, the adhesive is activated, increasing the bond between the felt pad and the furniture.
    4. No Scratches, No Noise, No Problem, Guaranteed
    1. Have a look at the videos to the left of screen to see the easiest way to install these pads.
    2. Put simply, it’s just a matter of removing the easy to peel backing and applying the felt to a clean surface. Any weight you apply to your furniture now will only increase the bond. If you want that extra bit of adhesion for commercial applications, or just some piece of mind so you never have to worry about those scratched floors again, then here’s something else you can do. Once attached you can heat activate the Flexi-Felt with an iron set on polyester. Hold the iron in place for 30 seconds or so and then let cool overnight. This really allows the adhesive to bind into your furniture. 
View full product details
 

Sled Based Chair Glides

$3.30

    1. Sold Individually
    2. Flexi-Felt’s Sled Based Chair Glides are the best available sled chair floor protector. Made of a transparent, high-grade plastic, they will protect your floors and your sled chairs. Flexi-Felt has an Antiroll System that guarantees the Flexi-Felt Glides will not move around or slip off once attached to the sled chair. Once installed, they are very difficult to remove. 
    3. Flexi-Felt offers their sled chair floor protectors in the following sizes- 10-11mm, 12-13mm, 15-16mm, 19-20mm, 22-23mm
  • These sizes are meant to fit the appropriate tubing size. The felt also comes in a light or dark color option to best fit your preferences. The sled chair floor protectors are sold individually. By ensuring a proper fit, Flexi-Fit guarantees that the noise and scratching typically associated with sled chairs will be significantly reduced.
    1. Sold Individually
    2. To find the right size simply measure the diameter of your chair tubing. One way to do this if you don't have callipers is to grab an adjustable wrench and tighten down on the tubing. Once you can go no further simply remove and measure with a ruler the distance between the two edges and you will have your diameter. Another way to do this is grab a tape measure or piece of paper and measure the circumference of the tubing. If using a piece of paper just mark on the paper where it comes back around to meet up with the start and then measure this distance on a ruler. Once you have the circumference measurement simply divide by 3.14 to get the diameter of the tubing. For example if the tubing circumference was 50mm, it would be 50mm divided by 3.14= 15.92mm. This would then mean just choosing the size that fits 16mm tubing. Simple! Just click on the size guide to work out which model will suit your furniture best.
    3. No Scratches, No Noise, No Problem, Guaranteed.
    1. Have a look at the videos to the left of screen to see the easiest way to install these sleds
View full product details
Size Guide

Sled Based Chair Glides

Below is a guide to helping you choose the correct model for your tube style furniture legs. 

 

 MODEL TO FIT TUBING SIZE
6010 10-11mm
6015 12-13mm
6020 15-16mm
6030 19-20mm
6035   22-23mm  

 

 


 

Industrial Strength Adhesive Felt Discs 25mm

$4.40

    1. Sold in Packs of 8
    2. Flexi-Felt’s chair leg floor protectors are different than cheap felt pads because of the quality they offer. Most felt pads are made of a cheap synthetic polyester, and will squish or compress over time as people sit on the chair. Flexi-Felt’s 25mm Industrial Strength Adhesive Felt Discs are made from a high-density wool. This means that they are guaranteed to maintain their figure and not compress over time. In fact, a 500 pound gorilla could sit in a chair overnight, and the Flexi-Felt 25mm discs would still do their job and protect your chair legs.
    1. Sold in Packs of 8
    2. Pre-cut to 25mm round discs 
    3. Flexi-Felt’s 25mm Industrial Strength Adhesive Felt Discs are the perfect chair leg floor protectors, as they are ideal for regular size chair legs.
    4. No Scratches, No Noise, No Problem, Guaranteed
    1. Have a look at the videos to the left of screen to see the easiest way to install these pads.
    2. Put simply, it’s just a matter of removing the easy to peel backing and applying the felt to a clean surface. Any weight you apply to your furniture now will only increase the bond. If you want that extra bit of adhesion for commercial applications, or just some piece of mind so you never have to worry about those scratched floors again, then here’s something else you can do. Once attached you can heat activate the Flexi-Felt with an iron set on polyester. Hold the iron in place for 30 seconds or so and then let cool overnight. This really allows the adhesive to bind into your furniture. 
View full product details
 

Industrial Strength Adhesive Felt Discs 32mm

$3.50

    1. Sold in Packs of 4 
    2. Industrial Strength 32mm Adhesive Felt Discs by Flexi-Felt are the best way to protect your chair and table legs from scratching your floor. The self-adhesive felt is easy to install on the bottom of your furniture legs.
    1. Flexi-Felt’s 32mm Self-Adhesive Felt Discs are sold as a pack of 4. They are pre-cut to a round 32mm size, although they can be trimmed if you need a felt disc that is slightly smaller in size. 
    2. No Scratches, No Noise, No Problem, Guaranteed
    1. Have a look at the videos to the left of screen to see the best installation methods.
    2. Put simply, it’s just a matter of removing the easy to peel backing and applying the felt to a clean surface. Any weight you apply to your furniture now will only increase the bond. If you want that extra bit of adhesion for commercial applications, or just some piece of mind so you never have to worry about those scratched floors again, then here’s something else you can do. Once attached you can heat activate the Flexi-Felt with an iron set on polyester. Hold the iron in place for 30 seconds or so and then let cool overnight. This really allows the adhesive to bind into your furniture.  
View full product details
 

Industrial Strength Adhesive Felt Roll (25mm x 914mm)

$18.50

    1. Sold Individually
    2. Flexi-Felt has worked to provide many different self-adhesive felt options, working to ensure that all of your furniture is protected. Doing so has led to the release of the 25mm Industrial Strength Adhesive Felt Roll.
    1. Sold by the Roll
    2. Flexi-Felt’s self-adhesive felt is guaranteed to last, growing stronger with each pound of force placed on it. Constructed with a commercial grade adhesive, the wool blend found in the 25mm Industrial Strength Adhesive Felt Roll contains a self-bonding adhesive that works to bond itself to the furniture surface. Unlike other felt pads that collapse or quickly lose their adhesive, Flexi-Felt’s self-adhesive feature means you install the felt once, and are done. The felt is made of a high-density wool, so it will not compress or lose its shape over time.
    3. No Scratches, No Noise, No Problem, Guaranteed
    1. Have a look at the videos to the left of screen to see the easiest way to install these pads.
    2. Put simply, it’s just a matter of removing the easy to peel backing and applying the felt to a clean surface. Any weight you apply to your furniture now will only increase the bond. If you want that extra bit of adhesion for commercial applications, or just some piece of mind so you never have to worry about those scratched floors again, then here’s something else you can do. Once attached you can heat activate the Flexi-Felt with an iron set on polyester. Hold the iron in place for 30 seconds or so and then let cool overnight. This really allows the adhesive to bind into your furniture. 
View full product details

 

Industrial Strength Adhesive Felt Discs 38mm

$4.40

    1. Sold in Packs of 4
    2. 38mm Industrial Strength Adhesive Felt Discs, brought to you by Flexi-Felt, are the best hardwood floor protectors on the market today. While typical felt protectors are made of cheap synthetic polyester, Flexi-Felt’s protectors are a wool blend. The quality of the wool means that Flexi-Felt’s pads can resist up to 25 times more sheer force than competitor’s pads.
    1. Sold in Packs of 4
    2. Pre-cut to 38mm round discs
    3. The Flexi-Felt pads are also very high density, meaning that they will stand up to the test of time. While competitor’s pads will flatten over time due to their cheap construction, Flexi-Felt’s 38mm felt discs will not compress when weight is placed on them. This durability is what makes them the best hardwood floor protectors available. Flexi-Felt’s 38mm felt discs reduce scratches by 50%, protecting your hardwood floors for many years to come.
    4. No Scratches, No Noise, No Problem, Guaranteed.
    1. Have a look at the videos to the left of screen to see the easiest way to install these sleds.
    2. Put simply, it’s just a matter of removing the easy to peel backing and applying the felt to a clean surface. Any weight you apply to your furniture now will only increase the bond. If you want that extra bit of adhesion for commercial applications, or just some piece of mind so you never have to worry about those scratched floors again, then here’s something else you can do. Once attached you can heat activate the Flexi-Felt with an iron set on polyester. Hold the iron in place for 30 seconds or so and then let cool overnight. This really allows the adhesive to bind into your furniture. 
View full product details
 

Industrial Strength Adhesive Felt Discs 50mm

$2.95

    1. Sold Individually
    2. Industrial Strength 50mm Adhesive Felt Discs by Flexi-Felt are the best way to protect your large chairs and table legs from scratching. The self-adhesive felt is easy to install on the bottom of your furniture legs
    1. Flexi-Felt’s 50mm Self-Adhesive Felt Discs are sold individually. They are pre-cut to their 50mm size, although they can be cut if you need a felt disc that is slightly smaller in size. They are sold individually.
    2. No Scratches, No Noise, No Problem, Guaranteed
    1. Have a look at the videos to the left of screen to see the best installation methods.
    2. Put simply, it’s just a matter of removing the easy to peel backing and applying the felt to a clean surface. Any weight you apply to your furniture now will only increase the bond. If you want that extra bit of adhesion for commercial applications, or just some piece of mind so you never have to worry about those scratched floors again, then here’s something else you can do. Once attached you can heat activate the Flexi-Felt with an iron set on polyester. Hold the iron in place for 30 seconds or so and then let cool overnight. This really allows the adhesive to bind into your furniture.  
View full product details
 

Office Chair Castor Covers

$15.00

    1. Sold as Pack of 10 to fit one standard chair
    2. Flexi-Felt is concerned about protecting the life of your flooring, and your furniture. Although it does not contain our world-renowned felt, our Office Chair Castor Covers serve as great chair floor protectors. These covers protect your floor from the hard caster wheels that are likely found on the office furniture you have in your home office.
    3. The Castor Cover is a soft, durable cover that slides over the wheels. Once the strip is properly in place, you apply heat to the castors. By applying the heat evenly, the castor cover will mold to the wheel snugly, providing you with a cheap, efficient chair floor protector that has been proven to increase the lifespan of your floors.
    1. 6501 Fits castors with a diameter of 46-51mm
    2. 6502 Fits castors with a diameter of 54-61mm
    3. 6503 Fits castors with a diameter of 67-76mm
    4. If you are using a chair with hard castor wheels, it is likely that you have also been using an expensive floor mat with it, which served as your chair floor protector. Flexi-Felt’s Office Chair Castor Covers eliminate the need for mats. The covers are sold in packs of 10. They fit most standard 5 castor chairs, and are guaranteed to reduce scratches and noise typically created by your office chair while maintaining full functionality.
    5. Stops the need to buy expensive matts for under office chairs
    6. No Scratches, No Noise, No Problem, Guaranteed
    1. Have a look at the install video to the left of screen to see best installation methods. 
View full product details

 

Industrial Strength Adhesive Felt Discs 64mm

$4.95

    1. Sold Individually
    2. Industrial Strength 64mm Adhesive Felt Discs by Flexi-Felt are the best way to protect your large chairs and table legs from scratching. The self-adhesive felt is easy to install on the bottom of your furniture legs
    1. Flexi-Felt’s 64mm Self-Adhesive Felt Discs are sold individually. They are pre-cut to their 64mm size, although they can be cut if you need a felt disc that is slightly smaller in size. They are sold individually.
    2. No Scratches, No Noise, No Problem, Guaranteed
    1. Have a look at the videos to the left of screen to see the best installation methods.
    2. Put simply, it’s just a matter of removing the easy to peel backing and applying the felt to a clean surface. Any weight you apply to your furniture now will only increase the bond. If you want that extra bit of adhesion for commercial applications, or just some piece of mind so you never have to worry about those scratched floors again, then here’s something else you can do. Once attached you can heat activate the Flexi-Felt with an iron set on polyester. Hold the iron in place for 30 seconds or so and then let cool overnight. This really allows the adhesive to bind into your furniture. 
View full product details
 

Industrial Strength Adhesive Felt Ovals (130mm x 35mm)

$1.49 $4.95

    1. Sold Individually
    2. Flexi-Felt’s 130mm Industrial Strength Adhesive Felt Ovals are designed for larger, oval style furniture legs on chairs and cabinets. These felt furniture pads measure 130mm x 35mm, which means they are large enough to protect your floors from your bigger pieces of furniture.
    3. Can easily be cut down to smaller sizes
    1. Sold Individually
    2. If you are looking to protect a bigger piece of furniture, but Flexi-Felt’s other pads are too small, the 130mm Industrial Strength Adhesive Felt Oval can be ideal. Because they are bigger is size, they can be trimmed down so that they fit your furniture perfectly.
    3. No Scratches, No Noise, No Problem, Guaranteed
    1. Have a look at the videos to the left of screen to see the easiest way to install these pads.
    2. Put simply, it’s just a matter of removing the easy to peel backing and applying the felt to a clean surface. Any weight you apply to your furniture now will only increase the bond. If you want that extra bit of adhesion for commercial applications, or just some piece of mind so you never have to worry about those scratched floors again, then here’s something else you can do. Once attached you can heat activate the Flexi-Felt with an iron set on polyester. Hold the iron in place for 30 seconds or so and then let cool overnight. This really allows the adhesive to bind into your furniture. 
View full product details
 

Industrial Strength Adhesive Felt Ovals (29mm x 51mm)

$1.37 $2.75

    1. Sold Individually
    2. Flexi-Felt’s 29mm Industrial Strength Adhesive Felt Ovals are felt furniture floor protectors designed to fit wider, oval shaped legs. These felt furniture floor protectors are strong enough to stick to and pull a minivan, which means they are definitely strong enough to remain on your bigger pieces of furniture, protecting your floors from damage.
    3. Can easily be cut down to smaller sizes
    1. The 29mm felt furniture floor protectors are sold individually, and are precut to 29mm x 51mm oval discs. They are a smaller option than the 64mm oval discs, also sold by Flexi-Felt. The 29mm ovals can be trimmed down to create the perfect fit on your furniture legs.
    2. No Scratches, No Noise, No Problem, Guaranteed
    1. Have a look at the videos to the left of screen to see the easiest way to install these pads.
    2. Put simply, it’s just a matter of removing the easy to peel backing and applying the felt to a clean surface. Any weight you apply to your furniture now will only increase the bond. If you want that extra bit of adhesion for commercial applications, or just some piece of mind so you never have to worry about those scratched floors again, then here’s something else you can do. Once attached you can heat activate the Flexi-Felt with an iron set on polyester. Hold the iron in place for 30 seconds or so and then let cool overnight. This really allows the adhesive to bind into your furniture. 
View full product details

 

Industrial Strength Adhesive Felt Pads (149mm x 114mm)

$13.50

    1. Sold Individually
    2. Flexi-Felt’s 149mm Industrial Strength Felt Furniture Pads provide the flexibility you need when protecting your floors and your furniture.
    1. Sold Individually
    2. These felt furniture pads can be cut out to fit any furniture design and style. The pads come in both dark and light, so that you can best match the felt to the style of your furniture. The felt furniture pads measure 149mm x 114 mm, so there is an ample amount of surface space, ensuring that you will be able to create the perfect cutout.
    3. No Scratches, No Noise, No Problem, Guaranteed
    1. Have a look at the videos to the left of screen to see the easiest way to install these pads.
    2. Put simply, it’s just a matter of removing the easy to peel backing and applying the felt to a clean surface. Any weight you apply to your furniture now will only increase the bond. If you want that extra bit of adhesion for commercial applications, or just some piece of mind so you never have to worry about those scratched floors again, then here’s something else you can do. Once attached you can heat activate the Flexi-Felt with an iron set on polyester. Hold the iron in place for 30 seconds or so and then let cool overnight. This really allows the adhesive to bind into your furniture. 
View full product details
 

Industrial Strength Adhesive Felt Pads (24mm x 24mm)

$4.40

    1. Sold in Packs of 8
    2. When it comes to finding chair floor protectors, there are many options to choose from. At Flexi-Felt, we offer a wide array of options to fit any sized chair or furniture. The 24 mm Industrial Strength Adhesive Felt Pads are the perfect fit for regular sized square chair legs. These square floor protectors come in dark and light colors, ensuring that you will find the perfect fit to match your chairs. They measure 24 mm x 24 mm, and are sold in packs of eight – one pack will protect two chairs.
    1. Sold in Packs of 8
    2. They are ideal for regular sized square chair legs
    3. No Scratches, No Noise, No Problem, Guaranteed
    1. Have a look at the videos to the left of screen to see the easiest way to install these pads.
    2. Put simply, it’s just a matter of removing the easy to peel backing and applying the felt to a clean surface. Any weight you apply to your furniture now will only increase the bond. If you want that extra bit of adhesion for commercial applications, or just some piece of mind so you never have to worry about those scratched floors again, then here’s something else you can do. Once attached you can heat activate the Flexi-Felt with an iron set on polyester. Hold the iron in place for 30 seconds or so and then let cool overnight. This really allows the adhesive to bind into your furniture. 
View full product details
 

Industrial Strength Adhesive Felt Pads (76mm x 76mm)

$5.60

    1. Sold Individually
    2. Flexi-Felt’s 76mm Industrial Strength Adhesive Felt Furniture Pad offers flexibility and convenience when protecting your furniture and your floors. The pad is designed for large furniture legs, but can also be cut to fit any project you are working on. These felt furniture pads are square, measuring 76mm x 76 mm. The pads are sold individually, and come in both light or dark color options.
    1. Sold Individually
    2. These pads are great for large furniture legs or cut to size projects.
    3. No Scratches, No Noise, No Problem, Guaranteed
    1. Have a look at the videos to the left of screen to see the easiest way to install these pads.
    2. Put simply, it’s just a matter of removing the easy to peel backing and applying the felt to a clean surface. Any weight you apply to your furniture now will only increase the bond. If you want that extra bit of adhesion for commercial applications, or just some piece of mind so you never have to worry about those scratched floors again, then here’s something else you can do. Once attached you can heat activate the Flexi-Felt with an iron set on polyester. Hold the iron in place for 30 seconds or so and then let cool overnight. This really allows the adhesive to bind into your furniture.  
View full product details

 

Industrial Strength Adhesive Felt Strips (19mm x 101mm)

$3.35

    1. Sold as Pack of 2
    2. Flexi-Felt’s 19mm Industrial Strength Adhesive Felt Strips are furniture floor protectors that offer superior quality and performance. These strips are ideal for sled based chairs, filing cabinets, or any other piece of furniture that could utilize a long strip.
    1. Sold in 2 lengths per pack
    2. These furniture floor protectors measure 19mm x 101 mm, which means they are long enough to fit many pieces of furniture. If it is too long, the strips can be cut, and utilized on another piece of furniture. You can also combine multiple strips on a piece of furniture, as well. The strips are sold as a set of two, and come in both light and dark options.
    3. No Scratches, No Noise, No Problem, Guaranteed
    1. Have a look at the install video to the left of screen to see best installation methods.
    2. These are great for sled based chairs, filing cabinets or anywhere a long strips are required. It’s simply a matter of removing the easy to peel backing and applying the felt to a clean surface. Any weight you apply to your furniture now will only increase the bond. If you want that extra bit of adhesion for commercial applications, or just some piece of mind so you never have to worry about those scratched floors again, then here’s something else you can do. Once attached you can heat activate the Flexi-Felt with an iron set on polyester. Hold the iron in place for 30 seconds or so and then let cool overnight. This really allows the adhesive to bind into your furniture.
View full product details
 

Industrial Strength Adhesive Slide Stop (76mm x 76mm)

$5.60

    1. Sold Individually
    2. Flexi-Felt’s Slide Stop floor grippers are designed to stop your furniture from sliding around. These textured rubber pads have an industrial self adhesive backing for easy application to your furniture legs.
    1. Sold Individually
    2. Pre-cut to squares of 76mm x 76mm 
    3. Flexi-Felt’s Industrial Strength Adhesive floor grippers are perfect for those furniture items you want to stay put. They can be cut or trimmed to any size to fit all types of furniture legs
    1. Put simply, it’s just a matter of removing the easy to peel backing and applying the rubber grippers to a clean surface. Any weight you apply to your furniture now will only increase the bond. Preferably leave overnight so the adhesive can bond into the furniture. 
View full product details
 

Industrial Strength Adhesive Slide Stop 37mm

$4.40

    1. Sold in Packs of 4
    2. Flexi-Felt’s Slide Stop floor grippers are designed to stop your furniture from sliding around. These textured rubber pads have an industrial self adhesive backing for easy application to your furniture legs.
    1. Sold in Packs of 4
    2. Pre-cut to 37mm round discs 
    3. Flexi-Felt’s 37mm Industrial Strength Adhesive floor grippers are perfect for those furniture items you want to stay put.
    1. Put simply, it’s just a matter of removing the easy to peel backing and applying the rubber grippers to a clean surface. Any weight you apply to your furniture now will only increase the bond. Preferably leave overnight so the adhesive can bond into the furniture. 
View full product details

 

Sled Based Chair Glides for Rectangular Furniture Legs

Sold Out

    1. Sold Individually
    2. Flexi-Felt’s Sled Based Chair Glides are the best available sled chair floor protector. Made of a transparent, high-grade plastic, they will protect your floors and your sled chairs. 
    3. If you have furniture legs that are around 12-13mm thick then this model might suit you.
    1. These clear plastic glides with dark wool blend felt are 12mm thick x 38mm long x 20mm high
    2. Sold Individually
    3. No Scratches, No Noise, No Problem, Guaranteed.
View full product details
 

Swivel Chair Floor Protector

$0.99 $3.30

    1. Sold Individually
    2. Swivel Chair Floor Protectors by Flexi-Felt are ideal laminate floor protectors. Backed by a five-year guarantee, they will reduce both the noise and scratches associated with moving furniture on a laminate floor. As such, they are the perfect option for those in schools, universities, and offices who use swivel chairs and are in search of laminate floor protectors.
    1. Sold Individually
    2. The laminate floor protectors come in two sizes. The thin model fits a swivel foot up 12mm, and the thick model fits a swivel foot greater than 12mm. They are sold individually, so be sure to buy four if you are looking to complete one chair.
    3. Our Flexi-Felt swivel bases are Guaranteed for 5 years. Why not try them risk free today.
    4. No Scratches, No Noise, No Problem, Guaranteed.
    1. Have a look at the videos to the left of screen to see the difference these floor protectors make in a typical classroom 
View full product details
 

Ultimate Swivel Chair Floor Protector

$0.99 $3.30

    1. Sold Individually
    2. Ultimate Swivel Chair Floor Protector Flexi-Felt’s Ultimate Swivel Chair Leg Floor Protectors are designed for chairs with swivel footings. You may have one of these chairs in your home office – otherwise, they are best suited in schools and universities. With a five-year guarantee, they are the best chair leg floor protectors you could purchase. A durable, moldable material goes on the end of the chair, and then is melted into place. This piece has felt attached on the bottom, protecting your floors and reducing noise typically accompanied with moving furniture.
    1. Sold Individually
    2. No Scratches, No Noise, No Problem, Guaranteed.
    1. Have a look at the videos to the left of screen to see how they work and are installed 
View full product details

 

Wheel Cups with Felt for Beds and Caster's

$14.50

    1. Sold in Packs of 4
    2. These felt bottom caster cups are great for keeping your floors protected from the damage and scratches that casters can cause.
    1. Sold in Packs of 4
    2. Will fit casters up to 50mm in diameter and 37mm wide
    3. No Scratches, No Noise, No Problem, Guaranteed
    1. Simply place the cup under the caster and you're done. No more slipping around.
View full product details
 

Wheel Cups with Slide Stop for Beds and Caster's

$14.50

    1. Sold in Packs of 4
    2. These Slide-Stop bed frame caster cups really keep the bed in place. So if you are tired of having your pillow or sheets fall in between the bed and the wall, or if your casters are damaging your floors this is what you need.
    1. Sold in Packs of 4
    2. Will fit casters up to 50mm in diameter and 37mm wide
    3. No Scratches, No Noise, No Problem, Guaranteed
    1. Simply place the cup under the caster and your done. No more slipping around.
View full product details