free shipping over $100

Menu 0
 

Industrial Strength Adhesive Felt Discs 50mm

$2.95

    1. Sold Individually
    2. Industrial Strength 50mm Adhesive Felt Discs by Flexi-Felt are the best way to protect your large chairs and table legs from scratching. The self-adhesive felt is easy to install on the bottom of your furniture legs
    1. Flexi-Felt’s 50mm Self-Adhesive Felt Discs are sold individually. They are pre-cut to their 50mm size, although they can be cut if you need a felt disc that is slightly smaller in size. They are sold individually.
    2. No Scratches, No Noise, No Problem, Guaranteed
    1. Have a look at the videos to the left of screen to see the best installation methods.
    2. Put simply, it’s just a matter of removing the easy to peel backing and applying the felt to a clean surface. Any weight you apply to your furniture now will only increase the bond. If you want that extra bit of adhesion for commercial applications, or just some piece of mind so you never have to worry about those scratched floors again, then here’s something else you can do. Once attached you can heat activate the Flexi-Felt with an iron set on polyester. Hold the iron in place for 30 seconds or so and then let cool overnight. This really allows the adhesive to bind into your furniture.  

Customer Reviews

Based on 3 reviews Write a review

PROTECT YOUR HARDWOOD FLOORS

These 50mm round discs are sold individually. They will fit larger style furniture legs. A small investment into hardwood floor protectors is a minimal cost compared to the cost of having to resurface or replace your beautiful hardwood floors. Flexi-Felt’s pads are soft, ensuring that your floors will be protected from scratching and scuffing.  


Related Items

 

Flexi-Felt Clear Floor Protectors

$3.30

    1. Sold Individually
    2. Free Install Tool with all orders of 6825, 6835 and 6845 models. Install tool is not appropriate for installing the smaller 6815 and 6820 models.
    3. Flexi-Felt Clear Floor Protectors offer quality protection without nails, screws, or adhesive. These chair floor protectors are different than your typical floor protector, as they are a stretchable, clear material with a felt pad attached at the bottom. The clear portion stretches over a chair leg, giving you maximum protection for your floors without an adhesive mess, or without the fear of the chair floor protectors falling off over time. We are so confident about our product we offer a UNBEATABLE FELT WARRANTY guaranteeing that the felt will never separate from the plastic sleeve.
    4. The protectors vary in size, meaning they will fit any style of chair leg ranging from 15mm-51mm. The felt pad at the bottom of the protector is made of a soft wool blend that has proven to be extremely durable. The density of the wool is so high, it is practically impossible to wear down the felt on the pad, as many felt pads tend to do over time. They are guaranteed to leave no scratches behind.
    5. The Flexifelt clear range will fit most square and round leg shapes, however they are not really designed for rectangular or highly angled chair legs. If slightly out of square no more than 5mm they should fit fine. Just half the measurement of the two sides to get your sizing. Also if your chairs are slightly angled then no problem also, it's only if they start to get way off 90 degrees that they become hard to fit. If in doubt send us a message or picture.
    1. To find the right size simply measure the diameter of your round leg or the width of your square furniture leg. If you have a leg that tapers up then measure the widest part 20mm up from the floor. An easy way to work out an accurate diameter of a round tapered chair leg is as follows: grab a piece of paper and wrap it around the chair leg 20mm up from the floor. Where it comes back around to meet up place a mark on the paper and then measure this distance with a ruler. Once you have the circumference measurement simply divide by 3.14 to get the diameter of the leg. For example if the leg circumference was 65mm, it would be 65mm divided by 3.14= 20.7mm. This would then mean for a round leg you would simply choose the appropriate model number according to the size chart, in this case model 6820. Just click on the size guide below to work out which model will suit your furniture best.
    2. No Scratches, No Noise, No Problem, Guaranteed
    1. Please watch the videos to the left of screen to see best installation methods
    2. Free Install Tool with all orders of 6825, 6835 and 6845 models. Install tool is not appropriate for installing the smaller 6815 and 6820 models.
View full product details
Size Guide

Sizing Guide Flexi-Felt Clear

Below is a sizing guide for each of our models to fit either a round or square furniture leg. You may find each model can stretch just a little further than these numbers but it requires a bit of effort.

 

 

MODEL SQUARE LEG ROUND LEG 
6815 NA 16-18mm
6820 NA 19-22mm
6825 22-25mm 25-32mm
6835 28-35mm 35-41mm
6845 36-41mm 44-51mm

 

 

 

Industrial Strength Adhesive Felt Discs 19mm

$3.85

    1. Sold in Packs of 10
    2. Flexi-Felt’s 19mm Industrial Strength Adhesive Felt Discs are the perfect felt pads for thin-legged furniture or table top appliances. Pre-cut to 19mm discs, the felt pads can be used to protect your floors, furniture, and countertops. Not only will they reduce scratches, but they are also proven to reduce noise.
    1. Sold in Packs of 10
    2. Pre-cut to 19mm round discs
    3. While most felt protectors wear down or fall off over time, Flexi-Felt’s 19mm Industrial Strength Discs integrate a powerful adhesive into wool. This means that Flexi-Felt’s pads are 25 times more sheer resistant that competitor’s pads. When weight is placed on other felt pads, they wear down or slip off. But, when weight is placed on Flexi-Felt pads, the adhesive is activated, increasing the bond between the felt pad and the furniture.
    4. No Scratches, No Noise, No Problem, Guaranteed
    1. Have a look at the videos to the left of screen to see the easiest way to install these pads.
    2. Put simply, it’s just a matter of removing the easy to peel backing and applying the felt to a clean surface. Any weight you apply to your furniture now will only increase the bond. If you want that extra bit of adhesion for commercial applications, or just some piece of mind so you never have to worry about those scratched floors again, then here’s something else you can do. Once attached you can heat activate the Flexi-Felt with an iron set on polyester. Hold the iron in place for 30 seconds or so and then let cool overnight. This really allows the adhesive to bind into your furniture. 
View full product details