free shipping over $100

Menu 0
 

Office Chair Castor Covers

6501

Sold Out

    1. Sold as Pack of 10 to fit one standard chair
    2. Flexi-Felt is concerned about protecting the life of your flooring, and your furniture. Although it does not contain our world-renowned felt, our Office Chair Castor Covers serve as great chair floor protectors. These covers protect your floor from the hard caster wheels that are likely found on the office furniture you have in your home office.
    3. The Castor Cover is a soft, durable cover that slides over the wheels. Once the strip is properly in place, you apply heat to the castors. By applying the heat evenly, the castor cover will mold to the wheel snugly, providing you with a cheap, efficient chair floor protector that has been proven to increase the lifespan of your floors.
    1. Fits castors with a diameter of 45-55mm
    2. If you are using a chair with hard castor wheels, it is likely that you have also been using an expensive floor mat with it, which served as your chair floor protector. Flexi-Felt’s Office Chair Castor Covers eliminate the need for mats. The covers are sold in packs of 10. They fit most standard 5 castor chairs, and are guaranteed to reduce scratches and noise typically created by your office chair while maintaining full functionality.
    3. Stops the need to buy expensive matts for under office chairs
    4. No Scratches, No Noise, No Problem, Guaranteed
    1. Have a look at the install video to the left of screen to see best installation methods. 

Customer Reviews

Based on 11 reviews Write a review

Related Items

 

Flexi-Felt Clear Floor Protectors

$3.30

    1. Sold Individually
    2. Free Install Tool with all orders of 6825, 6835 and 6845 models. Install tool is not appropriate for installing the smaller 6815 and 6820 models.
    3. Flexi-Felt Clear Floor Protectors offer quality protection without nails, screws, or adhesive. These chair floor protectors are different than your typical floor protector, as they are a stretchable, clear material with a felt pad attached at the bottom. The clear portion stretches over a chair leg, giving you maximum protection for your floors without an adhesive mess, or without the fear of the chair floor protectors falling off over time. We are so confident about our product we offer a UNBEATABLE FELT WARRANTY guaranteeing that the felt will never separate from the plastic sleeve.
    4. The protectors vary in size, meaning they will fit any style of chair leg ranging from 15mm-51mm. The felt pad at the bottom of the protector is made of a soft wool blend that has proven to be extremely durable. The density of the wool is so high, it is practically impossible to wear down the felt on the pad, as many felt pads tend to do over time. They are guaranteed to leave no scratches behind.
    1. To find the right size simply measure the diameter of your round leg or the width of your square furniture leg. If you have a leg that tapers up then measure the widest part 20mm up from the floor. An easy way to work out an accurate diameter of a round tapered chair leg is as follows: grab a piece of paper and wrap it around the chair leg 20mm up from the floor. Where it comes back around to meet up place a mark on the paper and then measure this distance with a ruler. Once you have the circumference measurement simply divide by 3.14 to get the diameter of the leg. For example if the leg circumference was 65mm, it would be 65mm divided by 3.14= 20.7mm. This would then mean for a round leg you would simply choose the appropriate model number according to the size chart, in this case model 6020. Just click on the size guide below to work out which model will suit your furniture best.
    2. No Scratches, No Noise, No Problem, Guaranteed
    1. Please watch the videos to the left of screen to see best installation methods
    2. Free Install Tool with all orders of 6825, 6835 and 6845 models. Install tool is not appropriate for installing the smaller 6815 and 6820 models.
View full product details
Size Guide

Sizing Guide Flexi-Felt Clear

Below is a sizing guide for each of our models to fit either a round or square furniture leg. You may find each model can stretch just a little further than these numbers but it requires a bit of effort.

 

 

MODEL SQUARE LEG ROUND LEG 
6815 NA 16-18mm
6820 NA 19-22mm
6825 22-25mm 25-32mm
6835 28-35mm 35-41mm
6845 36-41mm 44-51mm

 

 

 

Industrial Strength Adhesive Felt Discs 19mm

$3.85

    1. Sold in Packs of 10
    2. Flexi-Felt’s 19mm Industrial Strength Adhesive Felt Discs are the perfect felt pads for thin-legged furniture or table top appliances. Pre-cut to 19mm discs, the felt pads can be used to protect your floors, furniture, and countertops. Not only will they reduce scratches, but they are also proven to reduce noise.
    1. Sold in Packs of 10
    2. Pre-cut to 19mm round discs
    3. While most felt protectors wear down or fall off over time, Flexi-Felt’s 19mm Industrial Strength Discs integrate a powerful adhesive into wool. This means that Flexi-Felt’s pads are 25 times more sheer resistant that competitor’s pads. When weight is placed on other felt pads, they wear down or slip off. But, when weight is placed on Flexi-Felt pads, the adhesive is activated, increasing the bond between the felt pad and the furniture.
    4. No Scratches, No Noise, No Problem, Guaranteed
    1. Have a look at the videos to the left of screen to see the easiest way to install these pads.
    2. Put simply, it’s just a matter of removing the easy to peel backing and applying the felt to a clean surface. Any weight you apply to your furniture now will only increase the bond. If you want that extra bit of adhesion for commercial applications, or just some piece of mind so you never have to worry about those scratched floors again, then here’s something else you can do. Once attached you can heat activate the Flexi-Felt with an iron set on polyester. Hold the iron in place for 30 seconds or so and then let cool overnight. This really allows the adhesive to bind into your furniture. 
View full product details
 

Industrial Strength Adhesive Felt Discs 25mm

$4.40

    1. Sold in Packs of 8
    2. Flexi-Felt’s chair leg floor protectors are different than cheap felt pads because of the quality they offer. Most felt pads are made of a cheap synthetic polyester, and will squish or compress over time as people sit on the chair. Flexi-Felt’s 25mm Industrial Strength Adhesive Felt Discs are made from a high-density wool. This means that they are guaranteed to maintain their figure and not compress over time. In fact, a 500 pound gorilla could sit in a chair overnight, and the Flexi-Felt 25mm discs would still do their job and protect your chair legs.
    1. Sold in Packs of 8
    2. Pre-cut to 25mm round discs 
    3. Flexi-Felt’s 25mm Industrial Strength Adhesive Felt Discs are the perfect chair leg floor protectors, as they are ideal for regular size chair legs.
    4. No Scratches, No Noise, No Problem, Guaranteed
    1. Have a look at the videos to the left of screen to see the easiest way to install these pads.
    2. Put simply, it’s just a matter of removing the easy to peel backing and applying the felt to a clean surface. Any weight you apply to your furniture now will only increase the bond. If you want that extra bit of adhesion for commercial applications, or just some piece of mind so you never have to worry about those scratched floors again, then here’s something else you can do. Once attached you can heat activate the Flexi-Felt with an iron set on polyester. Hold the iron in place for 30 seconds or so and then let cool overnight. This really allows the adhesive to bind into your furniture. 
View full product details
 

Industrial Strength Adhesive Felt Discs 32mm

$3.50

    1. Sold in Packs of 4 
    2. Industrial Strength 32mm Adhesive Felt Discs by Flexi-Felt are the best way to protect your chair and table legs from scratching your floor. The self-adhesive felt is easy to install on the bottom of your furniture legs.
    1. Flexi-Felt’s 32mm Self-Adhesive Felt Discs are sold as a pack of 4. They are pre-cut to a round 32mm size, although they can be trimmed if you need a felt disc that is slightly smaller in size. 
    2. No Scratches, No Noise, No Problem, Guaranteed
    1. Have a look at the videos to the left of screen to see the best installation methods.
    2. Put simply, it’s just a matter of removing the easy to peel backing and applying the felt to a clean surface. Any weight you apply to your furniture now will only increase the bond. If you want that extra bit of adhesion for commercial applications, or just some piece of mind so you never have to worry about those scratched floors again, then here’s something else you can do. Once attached you can heat activate the Flexi-Felt with an iron set on polyester. Hold the iron in place for 30 seconds or so and then let cool overnight. This really allows the adhesive to bind into your furniture.  
View full product details