free shipping over $100

Menu 0
 

Industrial Strength Adhesive Felt Strips (19mm x 101mm)

5004W

$3.35

    1. Sold as Pack of 2
    2. Flexi-Felt’s 19mm Industrial Strength Adhesive Felt Strips are furniture floor protectors that offer superior quality and performance. These strips are ideal for sled based chairs, filing cabinets, or any other piece of furniture that could utilize a long strip.
    1. Sold in 2 lengths per pack
    2. These furniture floor protectors measure 19mm x 101 mm, which means they are long enough to fit many pieces of furniture. If it is too long, the strips can be cut, and utilized on another piece of furniture. You can also combine multiple strips on a piece of furniture, as well. The strips are sold as a set of two, and come in both light and dark options.
    3. No Scratches, No Noise, No Problem, Guaranteed
    1. Have a look at the install video to the left of screen to see best installation methods.
    2. These are great for sled based chairs, filing cabinets or anywhere a long strips are required. It’s simply a matter of removing the easy to peel backing and applying the felt to a clean surface. Any weight you apply to your furniture now will only increase the bond. If you want that extra bit of adhesion for commercial applications, or just some piece of mind so you never have to worry about those scratched floors again, then here’s something else you can do. Once attached you can heat activate the Flexi-Felt with an iron set on polyester. Hold the iron in place for 30 seconds or so and then let cool overnight. This really allows the adhesive to bind into your furniture.

Customer Reviews

Based on 11 reviews Write a review

The Van Test

The strength offered by these strips is unlike that of any other furniture floor protectors. The team at Flexi-Felt attached one of these strips to a van, and then pulled. The strip should have come off, correct? It’s just a piece of felt. Not only was the Flexi-Fit felt strip strong enough to stay attached to the van, it was strong enough to PULL the van! If the felt strips are strong enough to pull a minivan, they are definitely strong enough to hold up against any forces placed on them by your furniture. 

buy now

Related Items

 

Flexi-Felt Clear Floor Protectors

$3.30

    1. Sold Individually
    2. Free Install Tool with all orders of 6825, 6835 and 6845 models. Install tool is not appropriate for installing the smaller 6815 and 6820 models.
    3. Flexi-Felt Clear Floor Protectors offer quality protection without nails, screws, or adhesive. These chair floor protectors are different than your typical floor protector, as they are a stretchable, clear material with a felt pad attached at the bottom. The clear portion stretches over a chair leg, giving you maximum protection for your floors without an adhesive mess, or without the fear of the chair floor protectors falling off over time. We are so confident about our product we offer a UNBEATABLE FELT WARRANTY guaranteeing that the felt will never separate from the plastic sleeve.
    4. The protectors vary in size, meaning they will fit any style of chair leg ranging from 15mm-51mm. The felt pad at the bottom of the protector is made of a soft wool blend that has proven to be extremely durable. The density of the wool is so high, it is practically impossible to wear down the felt on the pad, as many felt pads tend to do over time. They are guaranteed to leave no scratches behind.
    5. The Flexifelt clear range will fit most square and round leg shapes, however they are not really designed for rectangular or highly angled chair legs. If slightly out of square no more than 5mm they should fit fine. Just half the measurement of the two sides to get your sizing. Also if your chairs are slightly angled then no problem also, it's only if they start to get way off 90 degrees that they become hard to fit. If in doubt send us a message or picture.
    1. To find the right size simply measure the diameter of your round leg or the width of your square furniture leg. If you have a leg that tapers up then measure the widest part 20mm up from the floor. An easy way to work out an accurate diameter of a round tapered chair leg is as follows: grab a piece of paper and wrap it around the chair leg 20mm up from the floor. Where it comes back around to meet up place a mark on the paper and then measure this distance with a ruler. Once you have the circumference measurement simply divide by 3.14 to get the diameter of the leg. For example if the leg circumference was 65mm, it would be 65mm divided by 3.14= 20.7mm. This would then mean for a round leg you would simply choose the appropriate model number according to the size chart, in this case model 6820. Just click on the size guide below to work out which model will suit your furniture best.
    2. No Scratches, No Noise, No Problem, Guaranteed
    1. Please watch the videos to the left of screen to see best installation methods
    2. Free Install Tool with all orders of 6825, 6835 and 6845 models. Install tool is not appropriate for installing the smaller 6815 and 6820 models.
View full product details
Size Guide

Sizing Guide Flexi-Felt Clear

Below is a sizing guide for each of our models to fit either a round or square furniture leg. You may find each model can stretch just a little further than these numbers but it requires a bit of effort.

 

 

MODEL SQUARE LEG ROUND LEG 
6815 NA 16-18mm
6820 NA 19-22mm
6825 22-25mm 25-32mm
6835 28-35mm 35-41mm
6845 36-41mm 44-51mm

 

 

 

Industrial Strength Adhesive Felt Discs 19mm

$3.85

    1. Sold in Packs of 10
    2. Flexi-Felt’s 19mm Industrial Strength Adhesive Felt Discs are the perfect felt pads for thin-legged furniture or table top appliances. Pre-cut to 19mm discs, the felt pads can be used to protect your floors, furniture, and countertops. Not only will they reduce scratches, but they are also proven to reduce noise.
    1. Sold in Packs of 10
    2. Pre-cut to 19mm round discs
    3. While most felt protectors wear down or fall off over time, Flexi-Felt’s 19mm Industrial Strength Discs integrate a powerful adhesive into wool. This means that Flexi-Felt’s pads are 25 times more sheer resistant that competitor’s pads. When weight is placed on other felt pads, they wear down or slip off. But, when weight is placed on Flexi-Felt pads, the adhesive is activated, increasing the bond between the felt pad and the furniture.
    4. No Scratches, No Noise, No Problem, Guaranteed
    1. Have a look at the videos to the left of screen to see the easiest way to install these pads.
    2. Put simply, it’s just a matter of removing the easy to peel backing and applying the felt to a clean surface. Any weight you apply to your furniture now will only increase the bond. If you want that extra bit of adhesion for commercial applications, or just some piece of mind so you never have to worry about those scratched floors again, then here’s something else you can do. Once attached you can heat activate the Flexi-Felt with an iron set on polyester. Hold the iron in place for 30 seconds or so and then let cool overnight. This really allows the adhesive to bind into your furniture. 
View full product details
 

Industrial Strength Adhesive Felt Discs 25mm

$4.40

    1. Sold in Packs of 8
    2. Flexi-Felt’s chair leg floor protectors are different than cheap felt pads because of the quality they offer. Most felt pads are made of a cheap synthetic polyester, and will squish or compress over time as people sit on the chair. Flexi-Felt’s 25mm Industrial Strength Adhesive Felt Discs are made from a high-density wool. This means that they are guaranteed to maintain their figure and not compress over time. In fact, a 500 pound gorilla could sit in a chair overnight, and the Flexi-Felt 25mm discs would still do their job and protect your chair legs.
    1. Sold in Packs of 8
    2. Pre-cut to 25mm round discs 
    3. Flexi-Felt’s 25mm Industrial Strength Adhesive Felt Discs are the perfect chair leg floor protectors, as they are ideal for regular size chair legs.
    4. No Scratches, No Noise, No Problem, Guaranteed
    1. Have a look at the videos to the left of screen to see the easiest way to install these pads.
    2. Put simply, it’s just a matter of removing the easy to peel backing and applying the felt to a clean surface. Any weight you apply to your furniture now will only increase the bond. If you want that extra bit of adhesion for commercial applications, or just some piece of mind so you never have to worry about those scratched floors again, then here’s something else you can do. Once attached you can heat activate the Flexi-Felt with an iron set on polyester. Hold the iron in place for 30 seconds or so and then let cool overnight. This really allows the adhesive to bind into your furniture. 
View full product details
 

Industrial Strength Adhesive Felt Discs 32mm

$3.50

    1. Sold in Packs of 4 
    2. Industrial Strength 32mm Adhesive Felt Discs by Flexi-Felt are the best way to protect your chair and table legs from scratching your floor. The self-adhesive felt is easy to install on the bottom of your furniture legs.
    1. Flexi-Felt’s 32mm Self-Adhesive Felt Discs are sold as a pack of 4. They are pre-cut to a round 32mm size, although they can be trimmed if you need a felt disc that is slightly smaller in size. 
    2. No Scratches, No Noise, No Problem, Guaranteed
    1. Have a look at the videos to the left of screen to see the best installation methods.
    2. Put simply, it’s just a matter of removing the easy to peel backing and applying the felt to a clean surface. Any weight you apply to your furniture now will only increase the bond. If you want that extra bit of adhesion for commercial applications, or just some piece of mind so you never have to worry about those scratched floors again, then here’s something else you can do. Once attached you can heat activate the Flexi-Felt with an iron set on polyester. Hold the iron in place for 30 seconds or so and then let cool overnight. This really allows the adhesive to bind into your furniture.  
View full product details