(BFCM weekend) free shipping over $50

Menu 0
 

Industrial Strength Adhesive Felt Pads (149mm x 114mm)

5000D

$13.50

    1. Sold Individually
    2. Flexi-Felt’s 149mm Industrial Strength Felt Furniture Pads provide the flexibility you need when protecting your floors and your furniture.
    1. Sold Individually
    2. These felt furniture pads can be cut out to fit any furniture design and style. The pads come in both dark and light, so that you can best match the felt to the style of your furniture. The felt furniture pads measure 149mm x 114 mm, so there is an ample amount of surface space, ensuring that you will be able to create the perfect cutout.
    3. No Scratches, No Noise, No Problem, Guaranteed
    1. Have a look at the videos to the left of screen to see the easiest way to install these pads.
    2. Put simply, it’s just a matter of removing the easy to peel backing and applying the felt to a clean surface. Any weight you apply to your furniture now will only increase the bond. If you want that extra bit of adhesion for commercial applications, or just some piece of mind so you never have to worry about those scratched floors again, then here’s something else you can do. Once attached you can heat activate the Flexi-Felt with an iron set on polyester. Hold the iron in place for 30 seconds or so and then let cool overnight. This really allows the adhesive to bind into your furniture. 

Customer Reviews

Based on 16 reviews Write a review

Flexi-Felt Quality

The 149mm Industrial Strength Felt Furniture Pads provide the protection you need when dealing with heavy, oddly-shaped furniture. The felt pads are soft, and are guaranteed to protect your floors from scratching. Doing so will also eliminate annoying scraping noises typically associated with moving furniture on a hard surface. The Flexi-Felt 149mm felt furniture pad features a wool blend that will attach to your furniture using a commercial grade adhesive. When moving awkwardly-shaped furniture, you should not have to worry about how the furniture is going to slide across the floor. With Flexi-Felt pads, you will not have to. Once attached, the felt pad is guaranteed to hold in place. 

buy now

Related Items

 

Flexi-Felt Clear Floor Protectors

$3.30

    1. Sold Individually
    2. Free Install Tool with all orders of 6825, 6835 and 6845 models. Install tool is not appropriate for installing the smaller 6815 and 6820 models.
    3. Flexi-Felt Clear Floor Protectors offer quality protection without nails, screws, or adhesive. These chair floor protectors are different than your typical floor protector, as they are a stretchable, clear material with a felt pad attached at the bottom. The clear portion stretches over a chair leg, giving you maximum protection for your floors without an adhesive mess, or without the fear of the chair floor protectors falling off over time. We are so confident about our product we offer a UNBEATABLE FELT WARRANTY guaranteeing that the felt will never separate from the plastic sleeve.
    4. The protectors vary in size, meaning they will fit almost any style of furniture legs ranging from 15mm-51mm. The felt pad at the bottom of the protector is made of a soft wool blend that has proven to be extremely durable. The density of the wool is so high, it is practically impossible to wear down the felt on the pad, as many felt pads tend to do over time. They are guaranteed to leave no scratches behind.
    5. The Flexifelt clear range will fit most square and round leg shapes, however they are not really designed for rectangular or highly angled chair legs. If slightly out of square no more than 5mm they should fit fine. Just half the measurement of the two sides to get your sizing. Also if your chairs are slightly angled then no problem also, it's only if they start to get way off 90 degrees that they become hard to fit. If in doubt send us a message or picture.
    1. REALLY IMPORT....take the time to measure your furniture legs properly. While there is absolutely no problem returning any order that doesn't fit or not what you are after as per our retuns policy, we really want you to get the correct size the first time! Please follow our guidelines below for finding the correct model for your furniture legs.
    2. ROUND LEGS.....To find the right size simply measure the diameter of your round leg on the bottom of your furniture. If you have a leg that tapers up then measure the widest part 20mm up from the floor. For round legs an easy way to work out this out is as follows: grab a piece of paper and wrap it around the chair leg 20mm up from the floor. Where it comes back around to meet up, place a mark on the paper and then measure this distance with a ruler. Once you have the circumference measurement simply divide by 3.14 to get the diameter of the leg. For example if the leg circumference was 65mm, it would be 65mm divided by 3.14= 20.7mm. This would then mean for a round leg you would simply choose the appropriate model number according to the size chart, in this case model 6820. Once you have the size , just click on the size guide below to work out which model will suit your furniture best.
    3. SQUARE LEGS.....For square legs simply measure the width at the bottom of your furniture leg.If you have a leg that tapers up then measure the widest part 20mm up from the floor. For tapered square legs simply measure the width 20mm up from the floor. Once you have the size , just click on the size guide below to work out which model will suit your furniture best.
    4. RECTANGULAR LEGS....Whilst not really designed for rectangular legs, if they are out of square by no more than 5mm then they should still work fine. Just half the measurements of the two widths. For example: if one side was 32mm and the other was 28mm then 32+28= 60. Then divide 60 by 2 which equals 30. With this measurement of 30mm you would then choose the appropriate model in the sizing guide for square legs, in this case model number 6835. Once you worked out the size , just click on the size guide below to work out which model will suit your furniture best.
    5. No Scratches, No Noise, No Problem, Guaranteed
    1. Please watch the videos to the left of screen to see best installation methods
    2. Free Install Tool with all orders of 6825, 6835 and 6845 models. Install tool is not appropriate for installing the smaller 6815 and 6820 models.
View full product details
Size Guide

Sizing Guide Flexi-Felt Clear

Below is a sizing guide for each of our models to fit either a round or square furniture leg. You may find each model can stretch just a little further than these numbers but it requires a bit of effort.

 

 

MODEL SQUARE LEG ROUND LEG 
6815 NA 15-18mm
6820 NA 19-22mm
6825 21-24mm 25-29mm
6835 28-32mm 35-39mm
6845 36-41mm 44-49mm

 

 

 

Industrial Strength Adhesive Felt Discs 19mm

$3.85

    1. Sold in Packs of 10
    2. Flexi-Felt’s 19mm Industrial Strength Adhesive Felt Discs are the perfect felt pads for thin-legged furniture or table top appliances. Pre-cut to 19mm discs, the felt pads can be used to protect your floors, furniture, and countertops. Not only will they reduce scratches, but they are also proven to reduce noise.
    1. Sold in Packs of 10
    2. Pre-cut to 19mm round discs
    3. While most felt protectors wear down or fall off over time, Flexi-Felt’s 19mm Industrial Strength Discs integrate a powerful adhesive into wool. This means that Flexi-Felt’s pads are 25 times more sheer resistant that competitor’s pads. When weight is placed on other felt pads, they wear down or slip off. But, when weight is placed on Flexi-Felt pads, the adhesive is activated, increasing the bond between the felt pad and the furniture.
    4. No Scratches, No Noise, No Problem, Guaranteed
    1. Have a look at the videos to the left of screen to see the easiest way to install these pads.
    2. Put simply, it’s just a matter of removing the easy to peel backing and applying the felt to a clean surface. Any weight you apply to your furniture now will only increase the bond. If you want that extra bit of adhesion for commercial applications, or just some piece of mind so you never have to worry about those scratched floors again, then here’s something else you can do. Once attached you can heat activate the Flexi-Felt with an iron set on polyester. Hold the iron in place for 30 seconds or so and then let cool overnight. This really allows the adhesive to bind into your furniture. 
View full product details
 

Sled Based Chair Glides

$3.30

    1. Sold Individually
    2. Flexi-Felt’s Sled Based Chair Glides are the best available sled chair floor protector. Made of a transparent, high-grade plastic, they will protect your floors and your sled chairs. Flexi-Felt has an Antiroll System that guarantees the Flexi-Felt Glides will not move around or slip off once attached to the sled chair. Once installed, they are very difficult to remove. 
    3. Flexi-Felt offers their sled chair floor protectors in the following sizes- 10-11mm, 12-13mm, 15-16mm, 19-20mm, 22-23mm
  • These sizes are meant to fit the appropriate tubing size. The felt also comes in a light or dark color option to best fit your preferences. The sled chair floor protectors are sold individually. By ensuring a proper fit, Flexi-Fit guarantees that the noise and scratching typically associated with sled chairs will be significantly reduced.
    1. Sold Individually
    2. REALLY IMPORT....take the time to measure your tubing properly. While there is absolutely no problem returning any order that doesn't fit or not what you are after as per our retuns policy, we really want you to get the correct size the first time! Please follow our guidelines below for finding the correct model for your sled chairs.
    3. To find the right size simply measure the diameter of your chair tubing. One way to do this if you don't have calipers is to just grab a piece of paper and wrap it around the tubing to measure the circumference. Once wrapped around the tubing just place a mark on the paper where it comes back around to meet up. Then measure this distance with a ruler. Once you have the circumference measurement simply divide by 3.14 to get the diameter of the tubing. For example if the tubing circumference was 50mm, it would be 50mm divided by 3.14= 15.92mm. Then just choose the size that fits according to our size guide. In this case it would be the 6020 model which fits 15-16mm tubing. Simple! Just click on the size guide below to work out which model will suit your sled base chairs best.
    4. No Scratches, No Noise, No Problem, Guaranteed.
    1. Have a look at the videos to the left of screen to see the easiest way to install these sleds
View full product details
Size Guide

Sled Based Chair Glides

Below is a guide to helping you choose the correct model for your tube style furniture legs. 

 

 MODEL TO FIT TUBING SIZE
6010 10-11mm
6015 12-13mm
6020 15-16mm
6030 19-20mm
6035   22-23mm  

 

 

 

Industrial Strength Adhesive Felt Discs 25mm

$4.40

    1. Sold in Packs of 8
    2. Flexi-Felt’s chair leg floor protectors are different than cheap felt pads because of the quality they offer. Most felt pads are made of a cheap synthetic polyester, and will squish or compress over time as people sit on the chair. Flexi-Felt’s 25mm Industrial Strength Adhesive Felt Discs are made from a high-density wool. This means that they are guaranteed to maintain their figure and not compress over time. In fact, a 500 pound gorilla could sit in a chair overnight, and the Flexi-Felt 25mm discs would still do their job and protect your chair legs.
    1. Sold in Packs of 8
    2. Pre-cut to 25mm round discs 
    3. Flexi-Felt’s 25mm Industrial Strength Adhesive Felt Discs are the perfect chair leg floor protectors, as they are ideal for regular size chair legs.
    4. No Scratches, No Noise, No Problem, Guaranteed
    1. Have a look at the videos to the left of screen to see the easiest way to install these pads.
    2. Put simply, it’s just a matter of removing the easy to peel backing and applying the felt to a clean surface. Any weight you apply to your furniture now will only increase the bond. If you want that extra bit of adhesion for commercial applications, or just some piece of mind so you never have to worry about those scratched floors again, then here’s something else you can do. Once attached you can heat activate the Flexi-Felt with an iron set on polyester. Hold the iron in place for 30 seconds or so and then let cool overnight. This really allows the adhesive to bind into your furniture. 
View full product details

UP TO 70% OFF + FREE SHIPPING OVER $50

"DISCOUNTS AUTOMATICALLY APPLIED AT CHECKOUT"

BFCM WEEKEND ONLY