free shipping over $100

Menu 0
 

Sled Based Chair Glides

6010D

$3.30

    1. Sold Individually
    2. Flexi-Felt’s Sled Based Chair Glides are the best available sled chair floor protector. Made of a transparent, high-grade plastic, they will protect your floors and your sled chairs. Flexi-Felt has an Antiroll System that guarantees the Flexi-Felt Glides will not move around or slip off once attached to the sled chair. Once installed, they are very difficult to remove. 
    3. Flexi-Felt offers their sled chair floor protectors in the following sizes- 10-11mm, 12-13mm, 15-16mm, 19-20mm, 22-23mm
  • These sizes are meant to fit the appropriate tubing size. The felt also comes in a light or dark color option to best fit your preferences. The sled chair floor protectors are sold individually. By ensuring a proper fit, Flexi-Fit guarantees that the noise and scratching typically associated with sled chairs will be significantly reduced.
    1. Sold Individually
    2. To find the right size simply measure the diameter of your chair tubing. One way to do this if you don't have callipers is to grab an adjustable wrench and tighten down on the tubing. Once you can go no further simply remove and measure with a ruler the distance between the two edges and you will have your diameter. Another way to do this is grab a tape measure or piece of paper and measure the circumference of the tubing. If using a piece of paper just mark on the paper where it comes back around to meet up with the start and then measure this distance on a ruler. Once you have the circumference measurement simply divide by 3.14 to get the diameter of the tubing. For example if the tubing circumference was 50mm, it would be 50mm divided by 3.14= 15.92mm. This would then mean just choosing the size that fits 16mm tubing. Simple! Just click on the size guide to work out which model will suit your furniture best.
    3. No Scratches, No Noise, No Problem, Guaranteed.
    1. Have a look at the videos to the left of screen to see the easiest way to install these sleds
Size Guide

Sled Based Chair Glides

Below is a guide to helping you choose the correct model for your tube style furniture legs. 

 

 MODEL TO FIT TUBING SIZE
6010 10-11mm
6015 12-13mm
6020 15-16mm
6030 19-20mm
6035   22-23mm  

 

 

Customer Reviews

Based on 149 reviews Write a review

Proven Durability

Flexi-Felt’s sled chair floor protectors were tested under conditions simulating the chair movements of a typical school day, with a 182kg person for five years. The glides were still in great shape, even after rigorous wear and tear. When simulated with a 72kg student, the Flexi-Felt Glides outlasted other floor protection products 15 to 1. After 10 years of wear and 200,000 transitions, the Flexi-Felt sled chair floor protectors are still performing like they did on day 1!  

buy now

Related Items

 

Flexi-Felt Clear Floor Protectors

$3.30

    1. Sold Individually
    2. Free Install Tool with all orders of 6825, 6835 and 6845 models. Install tool is not appropriate for installing the smaller 6815 and 6820 models.
    3. Flexi-Felt Clear Floor Protectors offer quality protection without nails, screws, or adhesive. These chair floor protectors are different than your typical floor protector, as they are a stretchable, clear material with a felt pad attached at the bottom. The clear portion stretches over a chair leg, giving you maximum protection for your floors without an adhesive mess, or without the fear of the chair floor protectors falling off over time. We are so confident about our product we offer a UNBEATABLE FELT WARRANTY guaranteeing that the felt will never separate from the plastic sleeve.
    4. The protectors vary in size, meaning they will fit any style of chair leg ranging from 15mm-51mm. The felt pad at the bottom of the protector is made of a soft wool blend that has proven to be extremely durable. The density of the wool is so high, it is practically impossible to wear down the felt on the pad, as many felt pads tend to do over time. They are guaranteed to leave no scratches behind.
    5. The Flexifelt clear range will fit most square and round leg shapes, however they are not really designed for rectangular or highly angled chair legs. If slightly out of square no more than 5mm they should fit fine. Just half the measurement of the two sides to get your sizing. Also if your chairs are slightly angled then no problem also, it's only if they start to get way off 90 degrees that they become hard to fit. If in doubt send us a message or picture.
    1. To find the right size simply measure the diameter of your round leg or the width of your square furniture leg. If you have a leg that tapers up then measure the widest part 20mm up from the floor. An easy way to work out an accurate diameter of a round tapered chair leg is as follows: grab a piece of paper and wrap it around the chair leg 20mm up from the floor. Where it comes back around to meet up place a mark on the paper and then measure this distance with a ruler. Once you have the circumference measurement simply divide by 3.14 to get the diameter of the leg. For example if the leg circumference was 65mm, it would be 65mm divided by 3.14= 20.7mm. This would then mean for a round leg you would simply choose the appropriate model number according to the size chart, in this case model 6820. Just click on the size guide below to work out which model will suit your furniture best.
    2. No Scratches, No Noise, No Problem, Guaranteed
    1. Please watch the videos to the left of screen to see best installation methods
    2. Free Install Tool with all orders of 6825, 6835 and 6845 models. Install tool is not appropriate for installing the smaller 6815 and 6820 models.
View full product details
Size Guide

Sizing Guide Flexi-Felt Clear

Below is a sizing guide for each of our models to fit either a round or square furniture leg. You may find each model can stretch just a little further than these numbers but it requires a bit of effort.

 

 

MODEL SQUARE LEG ROUND LEG 
6815 NA 16-18mm
6820 NA 19-22mm
6825 22-25mm 25-32mm
6835 28-35mm 35-41mm
6845 36-41mm 44-51mm

 

 

 

Office Chair Castor Covers

$15.00

    1. Sold as Pack of 10 to fit one standard chair
    2. Flexi-Felt is concerned about protecting the life of your flooring, and your furniture. Although it does not contain our world-renowned felt, our Office Chair Castor Covers serve as great chair floor protectors. These covers protect your floor from the hard caster wheels that are likely found on the office furniture you have in your home office.
    3. The Castor Cover is a soft, durable cover that slides over the wheels. Once the strip is properly in place, you apply heat to the castors. By applying the heat evenly, the castor cover will mold to the wheel snugly, providing you with a cheap, efficient chair floor protector that has been proven to increase the lifespan of your floors.
    1. 6501 Fits castors with a diameter of 46-51mm
    2. 6502 Fits castors with a diameter of 54-61mm
    3. 6503 Fits castors with a diameter of 67-76mm
    4. If you are using a chair with hard castor wheels, it is likely that you have also been using an expensive floor mat with it, which served as your chair floor protector. Flexi-Felt’s Office Chair Castor Covers eliminate the need for mats. The covers are sold in packs of 10. They fit most standard 5 castor chairs, and are guaranteed to reduce scratches and noise typically created by your office chair while maintaining full functionality.
    5. Stops the need to buy expensive matts for under office chairs
    6. No Scratches, No Noise, No Problem, Guaranteed
    1. Have a look at the install video to the left of screen to see best installation methods. 
View full product details
 

Plug Ended Tubes for Angled Chair Legs

$3.30

    1. Sold Individually
    2. Flexi-Felt’s Plug Ended Tubes For Angled Chair Legs are the best floor protectors for barstools. They are designed to fit angled furniture legs that do not have swivel footing. The plug ended tubes are best suited for commercial situations. These plug ended tubes are similar to the straight plug ended tubes in their design, except that the angled version has some flexibility and is not as rigid.
    1. Sold Individually
    2. The plug ended tubes come in four different sizes, so that you can create the perfect fit for your angled chair legs. They come in 20mm, 22mm, 25mm, and 28mm. This means they will fit most chair and table legs from 15mm to 28mm, making them the best floor protectors for your barstools.
    3. No Scratches, No Noise, No Problem, Guaranteed
    1. Have a look at the videos to the left of screen to see the difference these floor protectors make in a school environment.
View full product details
Size Guide

Sizing Guide Plug End Tubes

Below is a sizing guide for each of our plug end tube models to fit either a round or square furniture leg. 

 

 

MODEL SQUARE LEG ROUND LEG 
6120 15-17mm 19-21mm
6122 18-21mm 22-24mm
6125 22-24mm 25-27mm
6128 25-27mm 28-31mm

 

 

 

Sled Based Chair Glides for Rectangular Furniture Legs

$3.30

    1. Sold Individually
    2. Flexi-Felt’s Sled Based Chair Glides are the best available sled chair floor protector. Made of a transparent, high-grade plastic, they will protect your floors and your sled chairs. 
    3. If you have furniture legs that are around 12-13mm thick then this model might suit you.
    1. These clear plastic glides with dark wool blend felt are 12mm thick x 38mm long x 20mm high
    2. Sold Individually
    3. No Scratches, No Noise, No Problem, Guaranteed.
View full product details