Flexi-Felt Clear Floor Protectors
6815D
$3.30
-
- Sold Individually
- Free Install Tool with all orders of 6825, 6835 and 6845 models. Install tool is not appropriate for installing the smaller 6815 and 6820 models.
- Flexi-Felt Clear Floor Protectors offer quality protection without nails, screws, or adhesive. These chair floor protectors are different than your typical floor protector, as they are a stretchable, clear material with a felt pad attached at the bottom. The clear portion stretches over a chair leg, giving you maximum protection for your floors without an adhesive mess, or without the fear of the chair floor protectors falling off over time. We are so confident about our product we offer a UNBEATABLE FELT WARRANTY guaranteeing that the felt will never separate from the plastic sleeve.
- The protectors vary in size, meaning they will fit any style of chair leg ranging from 15mm-51mm. The felt pad at the bottom of the protector is made of a soft wool blend that has proven to be extremely durable. The density of the wool is so high, it is practically impossible to wear down the felt on the pad, as many felt pads tend to do over time. They are guaranteed to leave no scratches behind.
- The Flexifelt clear range will fit most square and round leg shapes, however they are not really designed for rectangular or highly angled chair legs. If slightly out of square no more than 5mm they should fit fine. Just half the measurement of the two sides to get your sizing. Also if your chairs are slightly angled then no problem also, it's only if they start to get way off 90 degrees that they become hard to fit. If in doubt send us a message or picture.
-
- To find the right size simply measure the diameter of your round leg or the width of your square furniture leg. If you have a leg that tapers up then measure the widest part 20mm up from the floor. An easy way to work out an accurate diameter of a round tapered chair leg is as follows: grab a piece of paper and wrap it around the chair leg 20mm up from the floor. Where it comes back around to meet up place a mark on the paper and then measure this distance with a ruler. Once you have the circumference measurement simply divide by 3.14 to get the diameter of the leg. For example if the leg circumference was 65mm, it would be 65mm divided by 3.14= 20.7mm. This would then mean for a round leg you would simply choose the appropriate model number according to the size chart, in this case model 6820. Just click on the size guide below to work out which model will suit your furniture best.
- No Scratches, No Noise, No Problem, Guaranteed
-
- Please watch the videos to the left of screen to see best installation methods
- Free Install Tool with all orders of 6825, 6835 and 6845 models. Install tool is not appropriate for installing the smaller 6815 and 6820 models.
Customer Reviews
not just your floors, protect your furniture
The Flexi-Felt Clear Floor Protectors will also protect your furniture. The clear material is barely visible, but will protect the bottom few inches of your furniture from bumps, scrapes, and scratches – think of the head of the vacuum running into your furniture when you are cleaning your floors.
Flexi-Felt® Clear 6815
The model stretches to fit a 16mm to 18mm round leg. The 6815 Model is mostly installed on thin bar stools and thin chair legs such as IKEA chair.
Flexi-Felt® Clear 6820
The models stretches to fit a 19mm to 22mm round leg. The 6820 Model is mostly installed on bar stools and typical 19mm square tube waiting room chairs.
Flexi-Felt® Clear 6825
The 6825 Model stretches to fit a 25mm to 32mm round tube or 22m to 25mm square leg. This model is mostly installed on folding tables and small wooden furniture.
Flexi-Felt® Clear 6835
The 6835 Model stretches to fit a 35mm to 41mm round tube or a 28mm to 35mm square leg. This model is mostly installed on desks and most dining room chairs.
Flexi-Felt® Clear 6845
The 6845 Model stretches to fit a 44mm to 51mm round tube or a 36mm to 41mm square leg.This model is mostly installed on tables and dining room chairs.
Related Items
Office Chair Castor Covers
$15.00
-
- Sold as Pack of 10 to fit one standard chair
- Flexi-Felt is concerned about protecting the life of your flooring, and your furniture. Although it does not contain our world-renowned felt, our Office Chair Castor Covers serve as great chair floor protectors. These covers protect your floor from the hard caster wheels that are likely found on the office furniture you have in your home office.
- The Castor Cover is a soft, durable cover that slides over the wheels. Once the strip is properly in place, you apply heat to the castors. By applying the heat evenly, the castor cover will mold to the wheel snugly, providing you with a cheap, efficient chair floor protector that has been proven to increase the lifespan of your floors.
-
- 6501 Fits castors with a diameter of 46-51mm
- 6502 Fits castors with a diameter of 54-61mm
- 6503 Fits castors with a diameter of 67-76mm
- If you are using a chair with hard castor wheels, it is likely that you have also been using an expensive floor mat with it, which served as your chair floor protector. Flexi-Felt’s Office Chair Castor Covers eliminate the need for mats. The covers are sold in packs of 10. They fit most standard 5 castor chairs, and are guaranteed to reduce scratches and noise typically created by your office chair while maintaining full functionality.
- Stops the need to buy expensive matts for under office chairs
- No Scratches, No Noise, No Problem, Guaranteed
-
- Have a look at the install video to the left of screen to see best installation methods.
Plug Ended Tubes for Angled Chair Legs
$3.30
-
- Sold Individually
- Flexi-Felt’s Plug Ended Tubes For Angled Chair Legs are the best floor protectors for barstools. They are designed to fit angled furniture legs that do not have swivel footing. The plug ended tubes are best suited for commercial situations. These plug ended tubes are similar to the straight plug ended tubes in their design, except that the angled version has some flexibility and is not as rigid.
-
- Sold Individually
- The plug ended tubes come in four different sizes, so that you can create the perfect fit for your angled chair legs. They come in 20mm, 22mm, 25mm, and 28mm. This means they will fit most chair and table legs from 15mm to 28mm, making them the best floor protectors for your barstools.
- No Scratches, No Noise, No Problem, Guaranteed
-
- Have a look at the videos to the left of screen to see the difference these floor protectors make in a school environment.
Sled Based Chair Glides
$3.30
-
- Sold Individually
- Flexi-Felt’s Sled Based Chair Glides are the best available sled chair floor protector. Made of a transparent, high-grade plastic, they will protect your floors and your sled chairs. Flexi-Felt has an Antiroll System that guarantees the Flexi-Felt Glides will not move around or slip off once attached to the sled chair. Once installed, they are very difficult to remove.
- Flexi-Felt offers their sled chair floor protectors in the following sizes- 10-11mm, 12-13mm, 15-16mm, 19-20mm, 22-23mm
- These sizes are meant to fit the appropriate tubing size. The felt also comes in a light or dark color option to best fit your preferences. The sled chair floor protectors are sold individually. By ensuring a proper fit, Flexi-Fit guarantees that the noise and scratching typically associated with sled chairs will be significantly reduced.
-
- Sold Individually
- To find the right size simply measure the diameter of your chair tubing. One way to do this if you don't have callipers is to grab an adjustable wrench and tighten down on the tubing. Once you can go no further simply remove and measure with a ruler the distance between the two edges and you will have your diameter. Another way to do this is grab a tape measure or piece of paper and measure the circumference of the tubing. If using a piece of paper just mark on the paper where it comes back around to meet up with the start and then measure this distance on a ruler. Once you have the circumference measurement simply divide by 3.14 to get the diameter of the tubing. For example if the tubing circumference was 50mm, it would be 50mm divided by 3.14= 15.92mm. This would then mean just choosing the size that fits 16mm tubing. Simple! Just click on the size guide to work out which model will suit your furniture best.
- No Scratches, No Noise, No Problem, Guaranteed.
-
- Have a look at the videos to the left of screen to see the easiest way to install these sleds
Sled Based Chair Glides for Rectangular Furniture Legs
$3.30
-
- Sold Individually
- Flexi-Felt’s Sled Based Chair Glides are the best available sled chair floor protector. Made of a transparent, high-grade plastic, they will protect your floors and your sled chairs.
- If you have furniture legs that are around 12-13mm thick then this model might suit you.
-
- These clear plastic glides with dark wool blend felt are 12mm thick x 38mm long x 20mm high
- Sold Individually
- No Scratches, No Noise, No Problem, Guaranteed.
Follow
Sign up to get the latest on sales, new releases and more …
© 2021 Flexi-Felt Australia.
Our logo was created by logomkr.com
Designed by Out of the Sandbox.
Powered by Shopify
